GUOSHI ADVANCED MATERIALS
Ceramic parts
for industrial furnaces
Radiant tubes, riser tubes, protection tubes, burner tubes and refractory materials for industrial furnaces, made in Zibo, Shandong, China.
AI-assisted concept render, not a product photograph
3D PRODUCT VIEW
Turn the burner tube in 3D
An outline sketch of the burner tube. Drag to turn it and look at the octagonal body and the opening at its end.
Product details →3D SKETCHNOT TO SCALE
Loading the 3D sketch…
Drag to rotate · buttons to zoomOutline sketch from photographs; dimensions not confirmed.
- [email protected]
- Telephone
- +86 533 5375177
- Address
- Zibo, Shandong Province, China
- Office hours
- Mon–Sat 08:00–17:30 (GMT+8)
CGL
Continuous galvanizing line
What it makes
Galvanized strip, coil after coil, without stopping.
Typical duty
900–1000 °C, reducing atmosphere, continuous. Tube life sets the shutdown interval for the whole line.
Where we are in it
| Zone | Part | What goes wrong there |
|---|---|---|
| Heating zone | Composite radiant tube | Circumferential cracking at the flange root; oxidation through-wall |
| Soaking zone | Composite radiant tube | Distortion — a bowed tube will not slide back into its sleeve |
| Element and burner sheaths | Silicon nitride radiant tube | Sheath failure exposing the element to the atmosphere |
| Furnace roof and wall | Castables | Spalling at the hot face through repeated cycling |
| Cast lining expansion joints | Expansion joint boards | Joint filler leaving too much ash, so the joint never opens and the lining cracks instead |
Zone-to-part mapping shows typical arrangements. Final selection depends on your furnace and operating conditions.